Publicité
Les langues disponibles
Les langues disponibles
EFP203
Service addresses
EN
Novopress GmbH Pressen und Presswerkzeuge & Co. KG
Welserstr. 7
41468 Neuss
Germany
You can find the addresses of authorised specialist workshops by contacting Novopress or at
www.novopress.de.
Service intervals
Service and repair work may only be carried out by Novopress or the authorised Novopress specialist
workshops.
Routine inspection (before use, at the start of the working day) and when soiled (Fig. 9)
Check for visible damage, material cracks and other signs of wear. If defects are found, do not use the
device and have it repaired.
•
Six-monthly inspection
Have the device inspected by a qualified electrician or a Novopress workshop.
•
Annually to get a 1-year extended warranty (see section 11 Warranty and guarantee)
Have the press device inspected and serviced at Novopress or a Novopress workshop.
•
10 Disposal
•
•
11 Warranty and guarantee
Novopress provides the full statutory warranty of 24 months for its press devices and tools. The
warranty period always commences on the date of delivery, which must be proven by means of the
sales documentation in case of doubt.
•
Within the warranty period, the warranty covers the repair of any damage or malfunction of these tools
that is attributable to material or production faults.
The following are not covered by the warranty:
For wearing parts, the Novopress warranty lasts only for the intended service life.
Information!
The next service deadline is indicated on the press device.
This service must be performed at least every 2 years.
CAUTION!
Groundwater hazard
The device contains hydraulic fluid.
Hydraulic fluids pose a hazard to groundwater. Uncontrolled drainage or improper
disposal is punishable by law.
Therefore:
–
Dispose of the device in an environmentally responsible manner.
The product must not be disposed of as residual waste.
Novopress recommends that disposal be carried out by authorised specialist
companies.
Alternatively, waste devices can be returned directly to Novopress (or a specialist
workshop) for proper disposal.
National disposal guidelines must be observed.
•
Damage caused by improper use or inadequate servicing.
Damage caused by the use of products not approved by Novopress for use with its
•
press devices.
Damage caused by pressing unsuitable pipes or fittings.
•
18
Publicité
