Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tubs with separate hot
and cold water taps
Hot water tap (1)
Cold water tap (2)
Shower head (4)
Drain control (5/5a)
N.B.: The control (5a) may be
positioned under the tub rim
It is advisable to fill the tub with
pre-mixed water (i.e. not the hot
water first and then the cold water)
at a maximum temperature of 60° to
prevent damaging the pipes and to
reduce the formation of lime scale.
When in the tub, the water level
should completely cov-
er the highest nozzles.
Taps
O
pen the taps (1-2) to automatically fill the tub through the spout (3).
3
Spout (3)
1
Spout
A lever is provided to divert the water to the showerhead. The lever automatically re-
turns to the "tub filling" position when the taps are closed.
Before filling the tub, make sure that the lever present on the back of the spout is po-
sitioned downwards.
Then operate the knobs checking the temperature of the water.
4
2
2
1
5
29
4
3
5
2
5a
Publicité
Table des Matières
