SilverCrest SDRB 1000 B1 Mode D'emploi page 19

RISK OF ELECTRICAL SHOCK!
The voltage of the power source must conform to the details given on
►
the type plate of the appliance .
To avoid potential risks, arrange for a defective appliance to be
►
checked and possibly repaired by qualified technicians, or contact
our Customer Service Department .
Arrange for defective power plugs and/or cables to be replaced
►
as soon as possible by a qualified technician or by our Customer
Service Department to avoid the risk of injury .
When disconnecting the appliance from the power source, pull only
►
on the plug itself, never on the cable .
Never bend (kink) or crush the power cable, always route it in such a
►
way that it cannot come into contact with hot surfaces and such that
no one can step on or trip over it .
Remove the plug from the mains power socket after every usage,
►
before cleaning the appliance and when refilling the appliance with
water .
Never touch the power cable or the plug with wet hands .
►
Under no circumstances should the appliance be submersed in liquids
►
or liquids be allowed to penetrate the housing . Do not expose the
appliance to humidity and do not use it outdoors . If any liquid gets
into the housing, disconnect the appliance from the mains power
socket immediately and have it repaired by a qualified technician .
■ 16 │ GB │ IE
SDRB 1000 B1