Scheppach HS105 Traduction Des Instructions D'origine page 31

• Check whether the scope of delivery is complete.
• Check the device and accessory parts for trans-
port damage.
• If possible, keep the packaging until the expiry of
the warranty period.
ATTENTION
The device and the packaging are not children's
toys! Do not let children play with plastic bags,
films or small parts! There is a danger of choking
or suffocating!
• Original Operating Manual
• Saw with pre-mounted saw blade
• Saw blade guard
• Extraction hose
• Riving knife
• Parallel stop
• Stop rail
• Transverse stop
• Table width extension (1x)
• Push stick
• Legs (4x)
• Transverse struts (2x)
• Longitudinal struts (2x)
• Centre struts, short (2x)
• Centre struts, long (2x)
• Rubber feet (4x)
• Assembly material
4. Proper use
The circular table saw is used for the longitudinal and
transverse cutting (only with the transverse stop) of
all types of timbers and plastic, in accordance with
the machine size. It is not permitted to cut any type
of round timber.
The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/opera-
tor, not the manufacturer, is responsible for damages
or injuries of any type resulting from this.
Only suitable saw blades (HM or CV saw blades) may
be used for the machine. The use of HSS saw blades
and any type of cutting wheels is prohibited.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the machine must
be familiar with the manual and must be informed about
potential dangers. In addition, the applicable accident
prevention regulations must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
m ATTENTION
When using equipment, several safety warnings must
be observed to prevent injuries and damage.
For this reason, please carefully read this operating
manual / safety instructions. Keep them in a safe place
so that the information is available at all times. If the
device is handed over to another person, hand over
the operating and safety instructions with it. We ac-
cept no liability for accidents or damage that occur
due to a failure to observe this manual and the safety
instructions.
The liability of the manufacturer and resulting dam-
ages are excluded in the event of modifications of the
machine.
Despite use as intended, specific risk factors cannot
be entirely eliminated. Due to the design and layout of
the machine, the following risks remain:
• Contact with the saw blade in the exposed sawing
area.
• Reaching into the running saw blade (cutting injury)
• Kick-back of workpieces and workpiece parts
• Saw blade breakage
• Ejection of faulty carbide parts of the saw blade
• Hearing damage when the necessary hearing pro-
tection is not used.
• Harmful emissions of wood dusts during use in en-
closed areas.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.
5. Safety information
General power tool safety warnings
m WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool.
www.scheppach.com GB | 31