Explanatory Diagram; The Wagner Click&Paint System; Disassembly Of The Spray Gun - WAGNER FINISH CONTROL 3500 Mode D'emploi

GB
EXPLANATORY DIAGRAM/ CLICK&PAINT SYSTEM
2
EXPLANATORY DIAGRAM (FIG. 1)
POS. DESIGNATION
1 Nozzle
2 Air ap
3 Spray jet width adjusting lever (shaping air)
4 Spray jet level adjusting ring (verti al/horizontal)
5 Union nut
6 Spray atta hment omplete
7 Material volume regulation
8 Fixture for shoulder strap
9 Air filter over lo k
10 Air filter over
11 Air volume ontrol
12 Power able
13 Cli k&Paint at h
14
Trigger (a tuates turbine starting swit h
onveyed)
3
THE WAGNER CLICK&PAINT SYSTEM
With the Wagner Cli k&Paint System, the front part of the gun (spray atta hment) an be repla ed qui kly and easily.
This enables a rapid material hange without leaning, and ensures that the right tool is available for every material and appli a-
tion.
The following spray atta hments are available:
Spray atta hment
StandardSpray (yellow)
Order No. 2321 879
FineSpray (brown)
Order No. 2321 877
WallSpray (white)
Order No. 2321 880
3.1

DISASSEMBLY OF THE SPRAY GUN

For assembly, insert the spray atta hment into the FC 3500 so that the two arrows point at ea h other.
Turn the FC 3500 90° in the arrow dire tion until it audibly engages. (Fig. 2)
To remove the spray atta hment, push the at h (Fig. 2, A) beneath the trigger down and turn the spray atta hment by 90°.
18
material is
Area of appli ation
Spray atta hment with slit nozzle and 1000 ml stainless steel ontainer. Pro esses all standard
paints.
Spray atta hment with round nozzle and 1000 ml stainless steel ontainer. Ideal for low-vis osity
paints and glazes.
Dispersion spray atta hment with slit nozzle and 1400 ml plasti
dispersions and latex paint.
POS. DESIGNATION
15 Container
16 Su tion tube
17 Container seal
18 Valve
19 Ventilating hose
20 Cleaning brush
21 Fine feed tube filter (red)
Coarse feed tube filter (white)
22 Funnel (3 p s.)
23 Repla ement air filter (3 p s.)
24 Carrying strap (for devi e and transport ase)
25 Transport ase
26 Vel ro to se ure the power able
FinishControl 3500
ontainer. Designed for pro essing