Troubleshooting - arilex EC665 Instructions Pour L'installation

6.
MAINTENANCE

Troubleshooting

Notes! Whenever the appliance does not work properly, try to solve the less serious
problems using this table.
FAULT
The appliance does not turn on.
Water is not delivered to tank.
Water does not drain from the
cooking compartment.
The inner walls of the tank are
covered with limestone.
The cooking compartment is
stained.
The light indicators do not turn
on.
If the problem cannot be resolved, turn the appliance off, and shut all the supply
valves. Then contact authorized customer service.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
POSSIBLE CAUSE
• The master switch is not con-
nected.
• The residual current device or
circuit breaker has tripped.
• Waterwork gate valve
closed.
• The drain is clogged.
The water is too hard; the sof-
tener is finished.
• Quality of the water.
• Ineffective detergent.
• Insufficient rinsing.
• The master switch is not con-
nected.
• The residual current device or
circuit breaker has tripped
- 20 - 20
OPERATION
• Connect the master switch.
• Restore the residual current
device and/or circuit breaker.
is • Open waterwork gate valve.
• Clean the drain filter.
• Free the drain from any resi-
dues.
• Connect the appliance to a
water softener.
• Regenerate the water sof-
tener.
• Descale the cooking compart-
ment.
• Filter the water (see water sof-
tener).
• Use the recommended deter-
gent.
• Rinse once again.
• Connect the master switch
• Restore the residual current
device and/or circuit breaker