AMAZON COMMERCIAL B083V7S41G Mode D'emploi page 26

EN
Non-contact voltage detection (100 V to 600 V AC)
WARNING
test the voltage detector on a known live circuit to verify proper
operation.
• Touch the non-contact probe tip (A) to the electrical device
or live conductor being checked.
NOTICE
voltage source, shielded wires, and other factors may effect
reliable operation. Use other methods to verify live voltage, if
there is any uncertainty.
NOTICE
twisted. For best results, rub the tip along the length of the cord
to ensure getting the tip in close proximity to the live conductor.
NOTICE
operation that static electricity or other sources of energy may
randomly trip the sensor.
Cleaning and Maintenance
NOTICE
cleaning.
NOTICE
water or other liquids. Never hold the product under running
water.
26
Risk of electric shock! Before use, always
Insulation type and thickness, distance from the
The conductors in electrical cords are often
The product has high sensitivity. It is normal in its
Switch the product and all the test leads off before
During cleaning do not immerse the product in