AMAZON COMMERCIAL B083V7S41G Mode D'emploi page 15

Automatic power OFF
• In order to conserve battery life, the product automatically
switches off after approximately 15 minutes. To switch the
meter on again, turn the function switch (K) to the OFF
position and then to the desired measurement mode.
• When "automatic power off" is enabled, the APO indicator
(13) appears on the display.
• To deactivate "automatic power off", press and hold the
MODE/VFD button (H) while switching the product on. The
APO indicator (13) does not appear on the display (F) when
"automatic power off" is not active.
Switching the flashlight on/off
• When switched on, press and hold the H /
2 seconds to switch the flashlight (N) on/off.
Switching the display backlight on/off
• Press and hold the REL /
switch the display backlight on/off.
Display hold
• To freeze the display reading, press the H /
H indicator (9) appears on the display while the reading is
being held.
• Press the H /
operation.
button (E) for 2 seconds to
button (J) again to return to normal
EN
button (J) for
button (J). The
15