AMAZON COMMERCIAL B083V7S41G Mode D'emploi page 22

EN
Capacitance measurement
WARNING
on live circuits. Safely discharge capacitor before testing.
• Insert the black connector lead (S) into the COM (black)
input terminal (I) and the red connector lead (S) into the V
(red) terminal (M).
• Set the function switch (K) to the Ω/CAP position.
• Press the MODE/VFD button (H) until the nF symbol
appears on the display (F).
• Connect the test probes (S) to the capacitor being tested.
• If OL appears on the display (F), remove and discharge the
capacitor.
• Read the capacitance on the display (F).
NOTICE
measurement, it can take several minutes before the final
reading stabilizes.
NOTICE
polarity (+, –) of its leads to ensure a precise measurement.
Frequency/duty cycle measurement
• Insert the black connector lead (S) into the COM (black)
input terminal (I) and the red connector lead (S) into the V
(red) terminal (M).
• Set the function switch (K) to the
22
Risk of electric shock! Never test capacitors
For very large values of capacitance
When measuring electrolytic capacitors, follow the
/ Hz / % position.