AMAZON COMMERCIAL B083V7S41G Mode D'emploi page 23

• Press the MODE/VFD button (H) until the Hz indicator
appears on the display (F).
• Connect the test probes (S) across the circuit or component
being measured.
• Read the frequency on the display (F).
Duty cycle measurement
• Insert the black connector lead (S) into the COM (black)
input terminal (I) and the red connector lead (S) into the V
(red) terminal (M).
• Set the function switch (K) to the
• Press the MODE/VFD button (H) until the % indicator
appears on the display (F).
• Connect the test probes (S) across the circuit or component
being measured.
• Read the frequency on the display (F).
Continuity measurement
WARNING
on live circuits.
• Insert the black connector lead (S) into the COM (black)
input terminal (I) and the red connector lead (S) into the V
(red) terminal (M).
• Set the function switch (K) to the
indicator (12) appears on the display.
Risk of electric shock! Never test continuity
/ Hz / % position.
position. The
/
EN
23