Publicité
Les langues disponibles
Les langues disponibles
EN
Using the mattress
Observe the following precautions before and during patient transfer.
1. Apply the brakes on both the trolley and the platform to which the transfer is to be made.
2.
section of the mattress.
3. Transfer forces should always be applied simultaneously and evenly along the full length of the mattress.
4.
5. Make sure that the trolley is as close to the other platform as possible. The transfer gap should not be more
that 10cm.
6.
being transferred to.
7. Adjust both platforms to an ergonomic transfer height.
8. The mattress will support a maximum patient weight of 180kg.
Decontamination
Remove the lower mattress section from the trolley for cleaning by pulling the hook and loop tape
strips apart.
To clean the mattress: wipe all surfaces with a disposable cloth soaked in a neutral detergent and
hand hot water. Rinse with clean water and dry with disposable paper towels.
To disinfect the mattress:
CAUTION
Do not use abrasive cleaners or phenol-based disinfectants.
4
CAUTION
The upper and lower sections should
both be the same version (Series 1 or
Series 3); Series 3 mattresses have
seam.
WA R N I NG
Wear gloves and protective clothing when carrying out cleaning
procedures.
180 kg
Publicité
