D
Insert wall bracket "A" (with end ring "C" and cover "B"
►
in position) into the wall holder "D" and simultaneously
pull the plug through the rectangular cutout.
E
F
►
When the wall bracket is vertically aligned, install it with
the M8 locking screw and nut "E" and tighten (20 Nm).
Tighten all 4 grub screws "F" (5 Nm).
►
►
Connect the ceiling tube plug with the power supply
plug.
►
Push the cover against the wall and screw tight with the
ring (0.5 Nm)
C
B
A
4.3
Installing the wall mounting arm
WARNING
Injury hazard from spring balanced arm jumping
The spring arm can open suddenly when the binding
agent is removed and cause injuries. Please remove
the binder very carefully.
B
A
C
Carefully loosen the cover "A".
►
Loosen the screws "C" and remove the joint covers "B".
►
D
Carefully remove the rotary plug "D".
►
►
Install the wall mounting arm.
ENG
A
31