Roborock H7 Manuel page 22

Maintenance
2. Rotate Multi-Cyclone Assembly counterclockwise as shown.
3. Open the front filter cover and remove the filter from the
cyclone assembly.
Front Filter
Multi-Cyclone
Assembly
4. Rinse the filter and cyclone assembly with cold water until clean.
Shake off excess water.
5. Leave 24 hours for the Front Filter and Multi-Cyclone Assembly
to dry thoroughly.
Caution:
Do not clean the filter in a dishwasher, washing machine, tumble dryer, oven, microwave,
with hot air, or near a fire.
6. After drying, re-assemble the Front Filter and Multi-Cyclone
Assembly.
22
24