Product Overview; Description Of The Product; Composition - Key Automation VIPER Instructions Et Avertissements Pour L'installation Et L'usage

EN

2 - PRODUCT OVERVIEW

2.1 Description of the product

Viper is an electromechanical irreversible gear motor, suitable to
automate up and over doors up to 14 m
16 m .
2

2.2 Composition

The system for garage door automation is composed of two boxes. One contains the package of the automation system; the other contains
the guide assembly, as shown in the illustration below.
Automation system package
Characteristic
Guide package
Guide (1 x) Straight arm for door (1 x)
Chain (1 x) Emergency cord (1 x)
Carriage (1 x)
16
and sectional doors up to
2
Package of various fastening devices
6x15 hex-head self-tapping screw
8x25 Hinge pin (1x) 3x20 Split pin
6x80 Expansion plug
Viper has a built-in encoder, control unit and receiver.
The receiver has the possibility to select fix or rolling code.
The rail is chain driven, pre-assembled in one or three pieces.
Name
Automation system
Manual
Curved arm for door
Mounting clamp
Support
U bracket
Support bracket
Door bracket
(8x) 6x80 Screw with hex nut
(1x) Lateral movement ring
(6x) 8x20 Screw with hex nut
Pre-assembled guide
Quantity
(1x)
(1x)
(4x)
1
1
1
2
1
3
1
1