Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6
Adjusting the Image
1. Turn on the projector
2. Display the test pattern
3. Change the aspect ratio if necessary
4. Adjust the focus
5. Use the adjustment knob on the left side to adjust the horizontal roll
6. Use the adjustment knob on the right side to adjust the horizontal rotation
7. Use the adjustment knob on the top to adjust the vertical tilt
8. Adjust the horizontal slide
9. Adjust the forward/backward slide
10. Adjust the vertical slide
11. Turn off the display of the test pattern
7
Attaching the Covers
1. Attach the wall plate cover and end cap
2. Attach the cable cover to the projector
8
Installing the Touch Unit
1. Turn on the projector
2. Display the installation pattern
3. Remove the markers
4. Determine the installation position for the Touch Unit
5. Install the Touch Unit
6. Connect the cable
7. Adjust the angle
8. Store the markers and attach labels
9. Attach cover
9
Installing the Control Pad
1. Remove the cable cover
2. Attach the Control Pad
3. Install the batteries
4. Connect the projector cables to the Control Pad
5. Attach the port protection stickers
6. Attach the cable cover
10
Appendix
1. Using the Easy Interactive Function
2. Attaching a Security Cable
7
s 41
s 47
s 49
s 62
s 66
Publicité
Table des Matières
