Epson BrightLink 475Wi Guide D'installation page 13

Control Pad
External dimensions and weight
The Control Pad weighs approximately 8.5 ounces (240 g).
5.4 in (135.9 mm)
Cable routing holes
When routing cables through a wall, use the position (
Otherwise, remove the cable cover (
along the groove on the back of the Control Pad.
0.4 in
(11.5 mm)
) in the following figure as the cable routing hole.
) and route the cables through the opening. Route the printer cable
13
4.4 in (111 mm)
4.3 in (109 mm)
0.1 in (3.5 mm)