Publicité
Les langues disponibles
Les langues disponibles
Extend completely the telescopic antenna. Change the position to improve the reception.
When switched on, choose with "POWER / MODE" (9) the FM mode.
AUTOMATIC STATION SEARCH
To start the automatic station search forward, press the "SCAN" (1) button.
Press and hold "SCAN" (1), the automatic station search starts backward.
Note: The radio automatically stops when a station is found.
MANUAL SEARCH
Briefly press the " " (4) or " " (5) button the to adjust the frequency in 50kHz steps.
If you keep one of the buttons pressed down, the station tuning runs faster.
STORE PRESET STATION
Is the same as in DAB mode.
RECALL PRESET STATION
Is the same as in DAB mode.
FM INFORMATION
Press "MENU / INFO" (2) repeatedly to cycle through the following information:
Radio text, PTY, frequency, time, date.
FM MENU
The device must be in FM mode. Enter the FM menu by press and hold the "MENU / INFO" (2)
button. Select with " " (4) or " " (5) the one of the following settings and press "SELECT" (6):
a) Scan setting:
Select the desired option for automatic station search.
- All stations: Search for all stations that can be received. In this case, station search also
stops for weak stations.
- Strong stations only: Only clear stations are searched.
b) System:
See under "SYSTEM SETTINGS".
IMPORTANT! The alarm function is not possible when the device is switched off in
battery operation.
SET THE ALARM
1. In on mode, press and hold "MENU / INFO" (2) for 3 seconds.
2. Select with " " (4) or " " (5) "System" and confirm with "SELECT" (6).
3. Choose the setting "Alarm" with " " (4) or " " (5) and press "SELECT" (6).
4. Select with " " (4) or " " (5) "Alarm 1 Setup" or "Alarm 2 Setup" and confirm with "SELECT"
(6).
5. Set the following settings with " " (4) or " " (5) and confirm each by pressing the "SELECT"
(6) button:
a) "Alarm on" or "Alarm off".
b) "Hour" and "Minute" of the alarm time.
FM
ALARM
4
DAB270 / English Instruction Manual
Publicité
