Milwaukee M18 Manuel De L'utilisateur page 2

2
IMPORTANT SAFETY INSTRUCTIONS
Read all safety warn-
WARNING
ings and all instruc-
tions. Failure to follow
the warnings and instructions may result in electric
shock, fire and/or serious injury. Save all warnings and
instructions for future reference.
WORK AREA SAFETY
• To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
• Store idle light out of reach of children. Warm lights
can become hazardous in the hands of children.
• Suitable for rain and wet locations. Store indoors.
PERSONAL SAFETY
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the light in
unexpected situations.
• Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
light in unexpected situations.
• To reduce the risk of injury, do not look directly
into the light when the light is on.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
• Use light only with specifically designated battery
packs. Use of any other battery packs may create a
risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or
risk of injury.
• Do not expose a battery pack or tool to fire or ex-
cessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your light serviced by a qualified repair per-
son using only identical replacement parts. This
will ensure that the safety of the light is maintained.
• Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorized service providers.
SPECIFIC SAFETY RULES
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
FUNCTIONAL DESCRIPTION
1
2
3
5
6
7
1.
Top handle
2.
Power button
3.
Mode buttons
4.
Clamp handle
5.
Light heads
6.
Battery compartment buckle
7.
Battery compartment
SYMBOLOGY
Volts
Direct Current
Underwriters Laboratories, Inc.
C US
United States and Canada
SPECIFICATIONS
Cat. No. .................................................... 2122-20
Ingress Protection...........................................IP56
Battery Type ................................................M18™
Charger Type ...............................................M18™
DC Input Volts.................................................... 18
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For spe-
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Inserting/Removing the Battery
To insert the battery:
1. Lift the battery compartment buckle and open the
battery compartment.
2. Slide the pack into the tool. Make sure it latches
securely into place.
3. Close the battery compartment and relatch the
buckle securely.
3
4
5