Publicité
Les langues disponibles
Les langues disponibles
Anleitung_NMC_355_SPK7:_
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Layout (Fig. 1/2)
1
Saw head
2
Handle
3
Adjustable guard for the cutting-off wheel
4
Adjustable clamping face
5
Spindle
6
Hand crank
7
Stationary clamping face
8
Carry handle
9
Shaft lock
10 ON/OFF switch
11 Cutting-off wheel
12 Table
13 Chain
14 Hinged nut
15 Vise
16 Lock screw
17 Lock screw
2. Items supplied
Metal cutting-off machine
Cutting-off wheel for steel
Open-ended wrench
3. Proper use
The metal cutting-off machine is designed for cutting
metal commensurate with the machineʼs size.
The machine is to be used only for its prescribed
purpose.
Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be
held liable for damage and/or injuries of any kind that
result from such misuse.
The machine is to be operated only with suitable
cutting-off wheels. It is prohibited to use any kind of
saw blade made of HSS, HM, CV, etc.
To use the machine properly you must also observe
the safety regulations, the assembly instructions and
the operating instructions to be found in this manual.
24.09.2008
9:47 Uhr
Seite 11
All persons who use and service the machine have
to be acquainted with this manual and must be
informed about the machineʼs potential hazards.
It is also imperative to observe the accident
prevention regulations in force in your area.
The same applies for the general rules of
occupational health and safety.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Even when the machine is used as prescribed it is
still impossible to eliminate certain residual risk
factors. The following hazards may arise in
connection with the machineʼs construction and
design:
Contact with the cutting-off wheel in the un-
covered cutting zone.
Reaching into the cutting-off wheel while it is
running (injuries through cutting).
Kick-back of workpieces and parts of work-
pieces.
Broken cutting-off wheels.
Catapulting of damaged or cutting-off wheels.
Damage to hearing if ear-muffs are not used as
necessary.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Important information
Please read the directions for use carefully and
observe the information provided. It is important to
consult these instructions in order to acquaint
yourself with the machine, its proper use and safety
precautions.
Warning: When using electric tools it is imper-
ative to take the following basic safety pre-
cautions in order to reduce the risk of electric
shock, injury and fire.
Take due note of all this information before and
Safety information
GB
11
Publicité
