Ayce 1515 Traduction De La Notice Originale page 82

NOTE: The first time the tool is run after changing the direction of rotation, you
may hear a click on start up. This is normal and does not indicate a problem.
Hammer action selector (Fig. 6)
Fig. 6
Power on indicator (Fig. 7)
Fig. 7
ON/OFF switch (Fig.8)
Fig. 8
1. To select hammer action for drilling
in masonry, set the hammer action
selector fully to the symbol marked
with " ".
2. To select drill mode for drilling in
wood and metal, set the hammer action
selector fully to the symbol marked
with " ".
Your tool has a "Power on indicator"
light. This light is always on when the
tool is plugged into a power source.
1. Start the tool by squeezing the
variable speed trigger switch.
2. Release the trigger to stop the tool.
3. If you press the lock on button while
the trigger switch is depressed, the
switch is kept in the operating position.
This is convenient when continuous
operating for extended periods of time
is required.
4. To release the lock on button, press
and release the trigger switch.