Ayce 1515 Traduction De La Notice Originale page 79

OPERATION
1. Before use
• Remove any packing material and loose parts from unit.
• Check the accessories before use. It should be fit with the machine and your
purpose.
2. Functions
Inserting and removing a bit (Fig. 2)
Always ensure that the plug is disconnected from the power
!
source, the tool is switched off before inserting or removing
bits to prevent accidental starting.
WARNING
Fig. 2
Auxiliary handle and depth gauge (Fig. 3)
Always ensure that the drill is switched off and plug is re-
!
moved from the power point before making any adjustments.
WARNING
Your tool is fitted with a keyless chuck for
greater convenience, a chuck key is not
needed to secure a bit in the chuck.
The chuck also has a locking device to
prevent bits loosening in use.
1. To insert / remove a drill bit, depress
the spindle lock button with one hand,
use your other hand to rotate the sleeve
of the chuck in an anti-clockwise
direction.
2. Open the chuck jaws sufficiently so
as to fit the desired bit.
3. Insert the drill bit into the chuck and
tighten securely by depressing down
the spindle lock button of the chuck
and rotating the sleeve in the clockwise
direction until you hear a "click".
78 | 79 GB