Ayce 1515 Traduction De La Notice Originale page 80

Image. 3
Never operate the product without the auxiliary handle to avoid
!
accidents and injury! Always ensure that the auxiliary handle is
attached and secured correctly before operation! The auxiliary
handle provides better control of the product should the tool
suddenly jam during use!
WARNING
1. Turn the handle grip anti-clockwise
to loosen the collar and slip it over the
chuck onto the tool.
2. Adjust the position of the handle
to suit the application, locate the
keyway on the collar of the drill into the
appropriate slot in the clamp, add the
depth gauge if required and tighten the
handle to secure it in place.
3. The auxiliary handle can be
swivelled 360° to find the position that
offers most comfort and the easiest
operation. The depth gauge helps keep
an accurate depth when drilling holes
to a set depth.
4. To change the position of the handle,
loosen the clamp by turning the handle,
partially remove the handle to free the
keyway from the slot, reposition the
handle and then retighten it.
4. To change the position of the depth
gauge, turn the grip of the handle
anti-clockwise until the depth gauge
is loose enough to slide in the hole.
Set the depth, checking the depth with
a steel ruler for the most accurate
measurement and then turn the handle
grip clockwise to tighten both the depth
gauge and the auxiliary handle in the
required position.