Ayce 1515 Traduction De La Notice Originale page 75

16. If you are interrupted when operating the drill, complete the process and switch
off before looking up.
17. Periodically check that all nuts, bolts and other fixings are properly tightened.
18. When using the drill, use safety equipment including safety glasses or shield,
hearing protection, and protective clothing including safety gloves. Wear a
dust mask if the drilling operation creates dust.
The tool must be used only for its prescribed purpose. Any use other than those
mentioned in this Manual will be considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury resulting from such cases of
misuse.
To use this tool properly, you must observe the safety regulations, the assembly
instructions and the operating instructions to be found in this Manual. All persons who
use and service the machine have to be acquainted with this
Manual and must be informed about its potential hazards. Children and frail people
must not use this tool. Children should be supervised at all times if they are in the
area in which the tool is being used. It is also imperative that you observe the accident
prevention regulations in force in your area.
The same applies for general rules of occupational health and safety.
The manufacturer shall not be liable for any changes made to the tool nor for any
damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to eliminate all residual risk
factors.
The following hazards may arise in connection with the tool's construction and design:
● Damage to the lungs if an effective dust mask is not worn.
● Damage to hearing if effective hearing protection is not worn.
● Hand-arm vibration syndrome if its use is not adequately managed
74 | 75 GB