Possible Faults - Scheppach KS1200 Traduction Des Instructions D'origine

Improper handling of waste equipment may have
negative consequences for the environment and hu-
man health due to potentially hazardous substances
that are often contained in electrical and electronic
equipment. By properly disposing of this product, you
are also contributing to the effective use of natu-
ral resources. You can obtain information on collec-
tion points for waste equipment from your municipal
administration, public waste disposal authority, an
authorised body for the disposal of waste electri-
cal and electronic equipment or your waste disposal
company.

14. Possible faults

Fault
Chain sharpener does not
operate..
Chain sharpener grinds with
interruptions
Grinding wheel becomes
hot
Motor is humming, grinding
wheel stops
Unusual vibrations
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Possible cause
• no power
• Extension cable defect
• Main plug, motor or switch
defect
• Extension cable defect
• Internal fault.
• ON/OFF button defective.
Grinding wheel is dull or
defective
Grinding wheel is blocked
Grinding wheel is defective
Remedy
• Check power supply, power socket and fuse
protection
• Check extension cable, exchange defect cable
immediately
• Have motor or switch checked by an approved
electrician or replaced by original spare parts
• Check extension cable, exchange defect cable
immediately
• Please contact the after sales service.
• Please contact the after sales service.
Replace grinding wheel
Remove object
Replace grinding wheel
GB | 25