Troubleshooting - EVBOX Elvi Manuel D'utilisation

troubleshooting

What you see What it means
Charging No power to charging
station station
does not react
Residual current •
device prevents
charging. •
LED ring blinks
red 10x.
•
LED ring Grounding fault
lights up red
constantly
Please see next page for more troubleshooting instructions.
Grounding error in the
charging station
Special ground
resistance needed for
the vehicle
Fault in the vehicle
or defective charging
cable
What to do
• Check residual current
device and circuit breaker on
the service panel (check by
user). If off, switch it on.
• Is the supply cable entering
the charging station live?
The LED ring should be on.
• Turn the charging station off.
Turn it on again after
20 seconds, by flipping the
circuit breaker or main switch
to Elvi.
Contact your service
technician for inspection
and solution. No user
serviceable parts.
Check if your electrical installation
is properly grounded. Contact your
service technician in case of doubt,
and to solve the local grounding
situation.
EN
8