Troubleshooting - EVBOX Wall Box Manuel D'utilisation

Part number: 9835663080

Troubleshooting

/
Led ring status
e
l
o
b
b
x
al
What you see What it means
LED ring off Wall box is ready for use.
or green
LED ring Your charge card is being
green, flashing verified.
LED ring The car is fully charged.
yellow
LED ring Charging session is in queue
yellow, flashing (applicable in the Smart
Charging environment only).
LED ring Wall box is charging the car.
blue
LED ring Wall box is experiencing
red an error.
LED ring Your charge card is not
red, flashing authorized to charge.
LED ring The wall box
purple, flashing to the user during the blue-
tooth pairing process
What to do
Plug the charging cable into the wall box.
Wait until LED ring turns blue.
Unplug the charging cable from the wall box
and place it back into your car.
When power becomes available, charging will
start or resume, and the LED ring will turn blue.
The car is charging.
Check the troubleshooting chapter in this man-
ual for solutions. If this does not solve the issue,
contact your installer or supplier.
Check the troubleshooting chapter in this man-
ual for solutions. If this does not solve the issue,
contact your installer or supplier.
identifies itself Continue the bluetooth pairing process.
EN
11