Gima PC-900PRO Mode D'emploi page 98

Ø Short press the print"
4.9 Setup Menu Screen
The Setup Menu screen is the main menu screen and a long press of Display View "
Menu screen, as shown in Figure 4.10.
Note: your monitor may not cover all the functional parameter settings listed in the main menu screen. Please refer to the
monitor you purchased.
There are up to 12 functional groups for setting parameters: "ECG, SpO
Date/Time, Nurse Call, Network, System Setup, Default and About" on the Setup Menu Screen depending on the
configuration of your monitor.
Instructions for navigation parameters:
1. Short press the "
2. Short press the "
3. Short press the "
Note: the device will save the latest setup settings automatically and the most of saved settings are non-volatile, i.e.
when you shut down the device and power up it next time, every setting item shows the settings saved last time except
the items like ECG cable setting and NIBP working mode.
" key to print this trend graph.
Figure 4.10 Root setup menu screen (refer to your monitor)
" or " " key to shift the cursor to corresponding functional group setting.
" key to confirm and enter into the corresponding functional parameter setup screen.
" to exit from the Setup Menu Screen.
, NIBP, TEMP, Hemostat, Patient Info,
2
28
" key will enter into the Setup