Installing your child restraint in the vehicle general
VEHICLE ATTACHMENT DESIGNS AND
COMPATIBILITY
Primo Viaggio Convertible Kinetic is designed
to be installed in a vehicle in Rear Facing
mode (RF) or in Forward Facing mode (FF) on
a forward facing vehicle seat.
It can be installed using:
1) UAS System
2) Vehicle Seatbelts
3) Additionally your seat is equipped with a Top
REAR FACING
Tether to be attached to a suitable Top Tether
anchorage point and an anti-rebound bar. Peg-
Perego always recommends use of a Top Tether and
ARB to increase safety and stability of the child seat.
Details are described in the following pages.
Peg-Perego recommends that caregivers have their
car seat installation checked by a certified child
passenger safety technician. These technicians are
trained for this specific purpose and are available in
your area.
If additional help is needed call Customer
FORWARD FACING
Service @ 1-800-661-5050.
- 14 -