Installing your child restraint in an aircraft
This child restraint is certified for use in an
1
aircraft. Most airlines should allow the use of
a restraint which is labelled for use according
to FAA regulations.
However, due to the size and weight of
the Primo Viaggio Convertible Kinetic, it is
recommended that airline is contacted for
further information prior to booking or flight.
Aircraft seatbelts are waist only type (Type I
belt).
1. Installation in rear facing mode: please
refer to the section on page 38 for proper belt
2
fit.
2. Installation in forward facing mode:
please refer to page 39 for proper belt fit.
Use of lockoff clips is not required.
After installation make sure that the child
restraint is properly levelled and safely
secured on the aircraft seat. Should you need
further help, please contact aircraft crew.
- 48 -