Table des Matières
Publicité
Installing your child restraint in the vehicle - Rear Facing Mode
PROPER LEVELLING OF CHILD
RESTRAINT IN REAR FACING MODE
When properly installed according to the
following sections, the child restraint used
in rear facing mode should have a backrest
angle of 35° - 45° from vertical. If it is not
possible to reach such angle, use a pool noodle
or a rolled towel to further recline the seat.
Use the line drawn on the product as a
reference. When the line is horizontal, the
backrest angle will be at 45° with vertical.
NOTE:
make
sure
that
the
angle
does
not
exceed
45°
with
vertical.
Important! Newborn infants should be
properly reclined. If the seat reclines too
much, your infant can be ejected from the
seat in an accident. If too upright, it can cause
breathing problems.
- 29 -
Publicité
Table des Matières
