Scheppach HSC130 Traduction Des Instructions D'origine page 13

Explanation of the symbols on the equipment m
Read through the entire text of the operating instructions before startup.
Wear safety glasses while working with the device.
Wear safety shoes while working with the device.
Wear work gloves while working with the device.
Set the cutting blade such that the cutting lever lies approx. 15° above the
horizontal.
Do not remove any protective equipment.
Never reach into the moving parts of the block splitter.
During the work process, never press the cutting lever in the opposite direc-
tion.
Beware of flying pieces.
Always place the stone material in the centre of the device.
GB | 13
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Heruntergeladen von manualslib.de Handbücher-Suchmachiene