General Notes; Symbols; Safety Notes; Intended Use - Burkert 2000 Mode D'emploi

GENERAL NOTES

Symbols

The following symbols are used in these operating instructions:
marks a work step that you must carry out.
ATTENTION!
NOTE

Safety notes

Please observe the notes in these instructions together with the conditions of
use and permitted data that are specified in the data sheets for the components
used, in order that they will function perfectly and remain operable for a long
time:
• Keep to standard engineering rules in planning the use of and operating the
device!
• Installation and maintenance work are only allowed by specialist personnel
using suitable tools!
• Observe the current regulations on accident prevention and safety for
electrical devices during operation, maintenance and maintenance of the
device!
• Always switch off the power supply before intervening in the system!
• Note that in systems under pressure, piping and valves may not be
loosened!
• Take suitable precautions to prevent inadvertent operation or damage by
unauthorized action!
• After interruption of the electrical or pneumatic supply, make sure the
process is restarted in a well-defined manner. Monitor the restarting of the
process!
• On non-observance of these notes and unauthorized interference with the
device, we will refuse all liability and the warranty on device and accessories
will become void!

Intended use

Please observe the notes in these conversion and assembly in order that the
device will function perfectly and remain operable for a long time. Keep to the
conditions of use and permitted data that are specified in the operating
instructions.
Any intervention in the device shall be carried out only by trained specialists
using suitable tools.
2 - 2000/2002/2012/2030/2031
marks notes on whose non-observance your health or the
functioning of the device will be endangered.
marks important additional information, tips and
recommendations.