Switching The Pump Off - BADU Block Multi 100 Traduction Du Instruction D'utilisation Originale

NOTICE
Starting the unit with open pressure lines may cause the motor to
overload.
 Make note of the motor's power reserve.
 Use the soft start (operation with frequency converter).
 Use speed regulation.
Pos: 147 /Technische Dokumentation/Betriebsanleitung/Inbetriebnahme/Multi/Pumpe ausschalten Multi @ 4\mod_1449581940042_370.docx @ 55288 @ 3 @ 1
6.1.5

Switching the pump off

1. Close the shut-off valve in the pressure line.
2. Switch the motor off.
For longer idle periods:
1. Close the shut-off valve in the suction line.
2. Close additional connections.
Risk of frost:
1. Store the pump and pipes at risk of freezing in a dry place
with no risk of frost.
2. Drain the pump and pipes.
Pos: 148 /Technische Dokumentation/Allgemeine Module/#### Seitenumbruch #### @ 0\mod_1426069111812_0.docx @ 891 @ @ 1
04/2016
Start-up/shut down
EN 31