Winding In Sleep Mode - Elma BUBEN&ZORWEG TIME MOVER Mode D'emploi

EN

5.4 WINDING IN SLEEP MODE

63
This winding mode simulates a close to authentic winding mode. In this
mode, the watch is not wound for a freely programmable period of up to
16 hours. This protects the watch by allowing the mainspring to release
tension. The number of revolutions per day as shown in the display are
then carried out in the remaining time outside of the resting period.
Activating the SLEEP procedure: navigate to SLEEP mode (fl ashes) in the
main menu . Press the OK button.
A
The word START and the starting time of the sleep phase appear in the
information fi eld . You can use the top or bottom cursor button to
G
change the starting time in increments of 15 minutes. Press the OK button
to confi rm.
The word END and the time at which the sleep phase will end now appear
in the information fi eld . You can use the top or bottom cursor button to
G
change the end time in increments of 15 minutes. Press the OK button to
®
confi rm. The TIME MOVER will now work in accordance with these settings.