Winding In Auto Mode - Elma BUBEN&ZORWEG TIME MOVER Mode D'emploi

EN

5.1 WINDING IN AUTO MODE

56
Default winding variant:
Your TIME MOVER ® is set to AUTO mode by default on delivery: clockwise
and counter-clockwise winding with 900 revolutions per day (= 450 per
direction of rotation). This is the most widely used setting and is suitable
for the majority of watches.
If you do not know which winding values are specifi ed by your watch
manufacturer we recommend you use the AUTO mode.
Procedure: In the basic setting the cursor is in the AUTO function (fl ash-
ing). If this is not the case, press the left cursor button once or more until
you reach the main menu. Now use the top or bottom cursor button to
navigate to the AUTO function.
Press the OK button: the watch winder starts to wind and the Start / Stop
display fl ashes. Press OK again to stop winding.
E