Elma BUBEN&ZORWEG TIME MOVER Mode D'emploi page 25

EN
61
Procedure: navigate the cursor to the SELECT function in the main menu
. Press the OK button: ALL 1 - 6 appears in the information fi eld . The
A G
selection ALL fl ashes, all modules are selected and indicate their active
status by „waving" their respective watch holder(s). You can use the
cursor to navigate to the right and select a specifi c module: the selected
module „waves", indicating its settings can now be adjusted.
Press OK to confi rm your selection: the Start/Stop display fl ashes. You
E
can now press the OK button to start winding under the adjusted settings
for direction of rotation and number of revolutions. If you want to change
the settings prior to winding, navigate to the corresponding function
using the right cursor button and adjust the changes by pressing the top
or bottom cursor button. Press the OK button to confi rm your selection:
the TIME MOVER ® will start the winding process.
Repeat the process to change the settings for other modules.