Winding In Select/Manual Mode; Time Mover; Module Description - Elma BUBEN&ZORWEG TIME MOVER Mode D'emploi

5.2 WINDING IN SELECT/MANUAL MODE

If you know the specifi cations for winding your automatic watch (e.g.
winding direction of the rotor and the required number of revolutions per
day) you can adjust the settings accordingly.
®

5.2.1 TIME MOVER

MODULE DESCRIPTION

There are 3 different types of TIME MOVER
1. TIME MOVER
2. TIME MOVER
3. TIME MOVER
The TIME MOVER
fi cations for every module. Please note that one module with 4 watch
holders is integrated in all watch winders for 4 watches. Therefore you can
only set one setting for the 4 watches. The SELECT-mode is not activated
on the display.
Watch winder models for 8 watches have two modules with 4 watch
holders each - in this case you can use the SELECT function to choose
different settings for the left and the right module. The SELECT function
is activated on the display.
®
module with 1 watch holder
®
module with 2 watch holders
®
module with 4 watch holders
®
technology allows you to set different winding speci-
® modules:
EN
57