Adjusting The Reference Clock Time - Elma BUBEN&ZORWEG TIME MOVER Mode D'emploi

EN
Procedure: stay in the SETUP menu and press the bottom cursor button
50
until LANGUAGE (fl ashing) appears in the information fi eld . Press the
G
OK button to activate the language: the current language selection is
indicated by fl ashing. Use the top and bottom cursor button to select the
language of your choice. Press the OK button to confi rm.
Continue with setting the correct time:

3.3 ADJUSTING THE REFERENCE CLOCK TIME

Procedure: stay in the SETUP menu and press the bottom cursor button
until TIME appears (fl ashing) in the information fi eld . Now press the OK
G
button: the fi rst number in the display fi eld for setting the time starts to
fl ash and can be changed by pressing the top or bottom cursor button.
Now press the right cursor button to activate the next input fi eld. Change
the number by pressing the top or bottom cursor button. Proceed as
before to set the minutes. Finally, press the OK button to confi rm your
settings.