Remote Control (Optional) - Faber Scirocco Lux SCLX3015BKNB-B Instructions D'installation Et Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

This appliance can be commanded using a remote

REMOTE CONTROL (OPTIONAL)

control, powered by a CR2032 type 3 V battery (not
The appliance can be controlled using a remote control
supplied).
• Do not place the remote control near heat sources.
powered by a 1.5 V carbon-zinc alkaline batteries of the
• Do not discard the batteries with normal waste, they
standard LR03-AAA type (not included).
must be put into the specific containers.
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper
manner.
Warning..: The remote control receiver is deactivated when first supplied. To activate it, see the
Warning..: The remote control receiver is deactivated when first supplied. To activate it, see the
paragraph Use Function of Button G.
paragraph Use Function of Button G.
Motor
Intensive
Delay
Light
18
Remote Control (Purchased Separately)
Remote Control Panel
Remote control panel
downdraft Down:
Opens the downdraft, turns the motor on at speed one and turns the lights on at
maximum intensity.
downdraft Up:
Brief pressure: Motor On / Off.
Pressed for 2 Seconds: Closes the downdraft and Motor + Lights = Off.
Only with downdraftUp
: Decreases the working speed each time it is pressed.
Only with downdraft Up
: Increases the working speed each time it is pressed.
Only with downdraft Up
: Activates the Intensive function.
Only with downdraft Up
: Activates the Delay function.
Only with downdraft Up
: Brief pressure: Lights On / Off.
Pressed for 2 Seconds: Dimmer lights On / Off.

Publicité

Table des Matières
loading

Table des Matières