Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USE
USE
Button Function
A
The button only works when the downdraft is open.
Button Function
Press Briefly = Turns the Lights On/Off at maximum intensity.
Press and hold for 2 Seconds = Turns the Dimmer Lights
A
The button only works when the downdraft is open.
On/Off.
Press Briefly = Turns the Lights On/Off at maximum intensity.
B
Only works with the downdraft Open.
Press and hold for 2 Seconds = Turns the Dimmer Lights
Press briefly = Activates/Deactivates Delay mode, causing auto-
On/Off.
matic shutdown of the Motor and the Lighting system from any
B
Only works with the downdraft Open.
speed with a 15' delay. It is disabled by pressing the same button
Press briefly = Activates/Deactivates Delay mode, causing auto-
again, turning the motor off or closing the downdraft.
matic shutdown of the Motor and the Lighting system from any
Works both with the downdraft Up and Down.
speed with a 15' delay. It is disabled by pressing the same button
Press and hold for 2 Seconds = With the filter alarm triggered the
again, turning the motor off or closing the downdraft.
Filter Alarm is Reset. These indications are only visible when the
Works both with the downdraft Up and Down.
motor is turned off.
Press and hold for 2 Seconds = With the filter alarm triggered the
Filter Alarm is Reset. These indications are only visible when the
motor is turned off.
Works both with downdraft Up and Down with Motor + Lights =
Off.
Press and hold for 4 Seconds = Enables/disables the Keyboard
Works both with downdraft Up and Down with Motor + Lights =
lock.
Off.
C
Only works with the downdraft Up.
Press and hold for 4 Seconds = Enables/disables the Keyboard
Press briefly = Activates speed four.
lock.
Only works with the downdraft Up.
C
Only works with the downdraft Up.
Press and hold for 2 seconds = Enables/Disables the Intensive
Press briefly = Activates speed four.
speed. This speed is timed to run for 6 minutes. At the end of this
Only works with the downdraft Up.
time the system will return to the speed set previously.
Press and hold for 2 seconds = Enables/Disables the Intensive
It is disabled by pressing the same button again, turning the motor
speed. This speed is timed to run for 6 minutes. At the end of this
off or closing the downdraft.
time the system will return to the speed set previously.
D
Only works with the downdraft Up.
It is disabled by pressing the same button again, turning the motor
Activates speed three.
off or closing the downdraft.
E
Only works with the downdraft Up
D
Only works with the downdraft Up.
Activates/Deactivates speed two.
Activates speed three.
F
Only works with the downdraft Up.
E
Press briefly = Activates/Deactivates speed one.
Only works with the downdraft Up
Activates/Deactivates speed two.
downdraft Up and Down
Press and hold for 2 Seconds = Enables/Disables the Activated
F
Only works with the downdraft Up.
Charcoal Filter Alarm with the Motor turned off and no Filter
Press briefly = Activates/Deactivates speed one.
Alarm triggered.
downdraft Up and Down
G
downdraft Up
Press and hold for 2 Seconds = Enables/Disables the Activated
Press briefly = Turns the Motor off.
Charcoal Filter Alarm with the Motor turned off and no Filter
downdraft Up and Down
Alarm triggered.
Press and hold for 2 Seconds with Motor and Lights Off =
G
downdraft Up
Enables/Disables the Remote control.
Press briefly = Turns the Motor off.
downdraft Up and Down
H
downdraft Up = Lower the downdraft + Lights and Motor Off
Press and hold for 2 Seconds with Motor and Lights Off =
downdraft Down = Upper the downdraft + Lights and Motor On.
Enables/Disables the Remote control.
Warning: If the downdraft remains partially open for any reason,
press the Button to complete the opening or closing cycle.
H
downdraft Up = Lower the downdraft + Lights and Motor Off
downdraft Down = Upper the downdraft + Lights and Motor On.
Warning: If the downdraft remains partially open for any reason,
press the Button to complete the opening or closing cycle.
EN
USE AND CARE INFORMATION
Control panel
Control panel
L
E
D
b
t u
o t
n
L
E
D
b
t u
o t
n
LED Button B+ Button for the set Speed are lit.
LED Button B+ Button for the set Speed are lit.
LED button ON:
Indicates the need to wash the metal grease filters.
The alarm is triggered after the Hood has been in
LED button ON:
operation for 100 working hours.
Indicates the need to wash the metal grease filters.
Flashing LED button:
The alarm is triggered after the Hood has been in
Indicates the need to change the activated charcoal
operation for 100 working hours.
filters, and also to wash the metal grease filters. The
Flashing LED button:
alarm is triggered after the Hood has been in
Indicates the need to change the activated charcoal
operation for 200 working hours.
filters, and also to wash the metal grease filters. The
All the LED buttons flash twice. During the Lock
alarm is triggered after the Hood has been in
the LED buttons light up in sequence.
operation for 200 working hours.
All the LED buttons flash twice. During the Lock
the LED buttons light up in sequence.
LED button ON.
Flashing LED button.
LED button ON.
Flashing LED button.
LED button ON.
LED button ON.
LED button ON.
LED button NO.
LED button ON.
LED button B flashes twice = Activated Charcoal
filter Alarm Activated.
LED button NO.
LED button B flashes once = Activated Charcoal
filter Alarm Deactivated.
LED button B flashes twice = Activated Charcoal
LED button goes out.
filter Alarm Activated.
LED button B flashes once = Activated Charcoal
LED button G + F flashes twice = Remote control
filter Alarm Deactivated.
Enabled.
LED button goes out.
LED button G + F flashes once = Remote control
Disabled.
LED button G + F flashes twice = Remote control
Enabled.
LED button G + F flashes once = Remote control
Disabled.
3 33
17
Publicité
Table des Matières
