Sony BC-L70 Mode D'emploi page 24

e Foot
Before charging a battery pack, rotate the
foot as shown in the figure to stabilize the
unit during charging.
Push in on both sides of the foot and
rotate it.
To return the foot to its original
position, push in at the same
positions and rotate it.
f DC output connector (XLR 4-pin)
Supplies DC power using a DC power cord
(not supplied).
g Charge mode selector
Selector Charge mode
position
H Batteries are charged to
their full capacity.
L Charge amount is
reduced, but it prolongs
battery life.
24 Location and Function of Parts
h POWER switch and indicator
Once you press the ? side of this switch,
power is supplied, and the associated
indicator lights up. The battery packs are
charged simultaneously.
i -AC IN (AC power input) connector
Used to connect the charger to an AC outlet
via the AC power cord.
IN
- A C
j Plug holder receptacle
The supplied plug holder secures the cord
so that it will not come loose from the
charger.
To AC outlet
AC power cord