Setting An End Time - Atag CX14411A Mode D'emploi

SETTING AN END TIME

Set and end time for when you would like to switch off the oven.
Example: switch off oven at 14.00 hours.
1
Select the desired setting and function
(and set the temperature if desired)�
3
Set the desired end time (14:00) using
the settings buttons�
Example: The desired time is
14:00 hours�
5
Press START to start cooking�
The cooking time '1:00' is shown�
Cooking will start�
Note
1) The time display shows the remaining time� Once the set time has expired, you will hear 4
beeps� '0:00' flashes on the display and the oven switches off automatically� The current
time appears on the display�
2) During cooking you can change the preset cooking time and the temperature for better
results� Press the timer button and change the time with the settings buttons�
3) If you want to cancel the programmed cooking time, press the timer button and use the
settings buttons to set the time to zero� Press the timer button again�
3) You can set the end time again as shown above� If you want to cancel the programmed
cooking time, press END TIME and set the time to the current time�
EN 30
2
Press the timer button for 3 seconds�
The current time flashes�
The 'end time' symbol lights up.
Example: It is 1�00 pm�
The figure '13:00' flashes�
4
Press the timer button again�
Example: The current time is
13:00 hours�
The desired end time is 14:00 hours�