Care And Maintenance; Spraying The Mechanics - B.A. International BA ULTIMATE POWER + Notice D'utilisation

6401553.book Seite 31 Montag, 10. September 2012 2:27 14
Operating Instructions BA ULTIMATE POWER + / BA ULTIMATE
64 01 553 D3551.201.03.01.02
7

Care and maintenance

Care and maintenance
Elastomers, e.g. O-rings, must be replaced depending on their degree of wear.
For safety and technical reasons, check the clamping system of the contra-angle
and straight handpiece bur instruments on an annual basis.
Check the clamping system of friction grip bur instruments on a monthly basis.
7.1

Spraying the mechanics

Intervals
● At least daily at noon and in the evening
● Prior to sterilization
● After thermodisinfection
7 Care and maintenance
31