B.A. International BA ULTIMATE POWER + Notice D'utilisation page 41

6401553.book Seite 39 Montag, 10. September 2012 2:27 14
Operating Instructions BA ULTIMATE POWER + / BA ULTIMATE
64 01 553 D3551.201.03.01.02
Saturated water vapor: Temperature: 134°C (274°F)
Overpressure: 2.04 bar (29.59 psi)
Holding time: 3 min
Steam sterilizers that fulfill the requirements of either EN 13060, class B (for
example, DAC PROFESSIONAL) or EN 13060, class S and are suitable for the
sterilization of straight/contra-angle handpieces are approved.
NOTICE! Do not exceed 140°C (284°F), even during the drying phase.
The instrument can be sterilized in a packaging which is suitable for sterilization
and storage, e.g. a paper/plastic composite packaging.
After sterilizing
1. Remove the instrument from the steam sterilizer immediately.
CAUTION! The instrument will be hot. There is a risk of burning!
NOTICE! Do not accelerate the cooling process by dipping the instrument into
cold water. This will damage your instrument.
2. Store all instruments so that they are protected from contamination.
3. Sterilize again once the storage period has elapsed.
7 Care and maintenance
39