Safety Instructions - B.A. International BA ULTIMATE POWER + Notice D'utilisation

6401553.book Seite 11 Montag, 10. September 2012 2:27 14
Operating Instructions BA ULTIMATE POWER + / BA ULTIMATE
Obligations of the user
Prevention of infection and cross-contamination
Emitted cooling air
Instrument head overheating
Malfunction or damage
64 01 553 D3551.201.03.01.02
2

Safety instructions

Safety instructions
➢ Only use operating resources in error free condition which do not deviate from
the specified data [ → 17].
➢ Protect yourself, patients and others against any foreseeable dangers. In
order to do so, follow the safety instructions.
➢ Use the equipment as intended.
➢ You should always keep these operating instructions within reach for further
reference.
Prevent infection and cross-contamination between patients, users, and third
parties as follows: Sterilize equipment after each patient.
Take the appropriate hygiene measures e.g. wear protective gloves.
The cooling air emitted by the coupling of the motor must have a flow rate of 1.5 -
10 Nl/min.
If the instrument is defective, the area around the instrument head may heat up,
thus creating a risk of burning the patient's oral mucosa.
Immediately discontinue use in the case of malfunction or damage. Damaged
instruments may cause injury. Notify the dental depot or the manufacturer.
The BA instrument is the result of a precise development and must not be
disassembled by third parties. In the case of service or repair work, please send
2 Safety instructions
11