Déclarations De Conformité Aux Différentes Réglementations - HP Photosmart PSC 2400 Serie Guide De Référence

Table des Matières

Publicité

chapitre 12
déclarations de conformité aux différentes réglementations
Le HP PSC est conçu pour être conforme aux réglementations de votre pays/région.
Cette section contient les rubriques suivantes :
numéro réglementaire d'identification du modèle
notice to users of the U.S. telephone network: FCC requirements
FCC statement
note à l'attention des utilisateurs du réseau téléphonique Canadien/notice to users
of the Canadian telephone network
note à l'attention des utilisateurs Canadien/notice to users in Canada
page 120
note à l'attention des utilisateurs résidant dans l'Espace Economique Européen
page 121
notice to users of the German telephone network
declaration of conformity (European Union)
geräuschemission
notice to users in Japan (VCCI-2)
notice to users in Korea
numéro réglementaire d'identification du modèle
A des fins d'identification, et ainsi que l'impose la réglementation, un Numéro de modèle
réglementaire a été attribué à votre produit. Le Numéro de modèle réglementaire de votre
produit est le SDGOB-0301-02. Ce numéro réglementaire ne doit pas être confondu avec
le nom sous lequel le produit est commercialisé (HP PSC 2400 Photosmart Series) ni avec
le numéro de produit (Q3083A).
notice to users of the U.S. telephone network: FCC requirements
This equipment complies with FCC rules, Part 68. On this equipment is a label that
contains, among other information, the FCC Registration Number and Ringer Equivalent
Number (REN) for this equipment. If requested, provide this information to your telephone
company.
An FCC compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using
a compatible modular jack which is Part 68 compliant. This equipment connects to the
telephone network through the following standard network interface jack: USOC RJ-11C.
The REN is useful to determine the quantity of devices you may connect to your telephone
line and still have all of those devices ring when your number is called. Too many devices
on one line may result in failure to ring in response to an incoming call. In most, but not
all, areas the sum of the RENs of all devices should not exceed five (5). To be certain of
the number of devices you may connect to your line, as determined by the REN, you should
call your local telephone company to determine the maximum REN for your calling area.
If this equipment causes harm to the telephone network, your telephone company may
discontinue your service temporarily. If possible, they will notify you in advance. If advance
notice is not practical, you will be notified as soon as possible. You will also be advised of
your right to file a complaint with the FCC. Your telephone company may make changes
in its facilities, equipment, operations, or procedures that could affect the proper operation
of your equipment. If they do, you will be given advance notice so you will have the
opportunity to maintain uninterrupted service.
If you experience trouble with this equipment, please contact the manufacturer, or look
elsewhere in this manual, for warranty or repair information. Your telephone company may
ask you to disconnect this equipment from the network until the problem has been corrected
or until you are sure that the equipment is not malfunctioning.
118
à la page 119
à la page 120
à la page 121
à la page 122
à la page 122
à la page 118
à la page 118
à la page 121
à la page 121
hp psc 2400 series
à la
à la

Publicité

Table des Matières
loading

Table des Matières