Anova MG246 Manuel D'instructions page 89

Attention! Read these notes before starting to work with the
machine and keep them with the machine.
Read the instructions carefully. Familiarize yourself with the control
elements to be able to use the device safely. Always keep these operating
instructions with the chain saw.
Attention! Risk of hearing damage.
Under normal operating conditions, this device can expose the
operator to a noise level of 80 dB (A) or more.
The chain saw will be held with the right hand on the rear handle and the
left hand on the front handle.
Attention: Protection against noise! Please observe local
regulations when using your device. Use appropriate and approved
hearing protectors.
Intended / unintended use:
The chain saw is used to cut logs, square beams and to cut branches, according to
the available cutting length. The chainsaw is designed for cutting in wood.
Appropriate personal protective equipment (PPE) is required in accordance with
applicable regulations.
This product is designed to be used by a trained logging operator. Damage or injury
resulting from improper application will be the responsibility of the user / operator
and not the manufacturer.
Suitable cutting chains and bar combinations may be used as mentioned in the
operating instructions for the indicated machine only.
People who operate the machine should be trained and familiar with this product
and think of all possible hazards. In addition to the current regulations for the
prevention of accidents, special attention will be paid to the prevention of serious
injuries and other general regulations in accordance with industrial medicine.
Unauthorized changes to the machine completely exclude a support from the
manufacturer, as well as possible causes in possible damage. Such modifications
will also void the warranty.
It is important to especially observe different unforeseen events depending on the type and
construction of the machine and a possible danger or damage:
- Contact with the unprotected saw chain (cuts)
- Unexpected and sudden movement of the saw blade (cuts)
- Damage to the hearing system, if ear protection is not prescribed
- Inhalation of poisonous particles, combustion engine exhaust gases.
- Contact of gasoline on the skin and irritations.
- High noise. Keep rest periods and you may need to restrict work hours to a minimum. For
your personal protection and protection of people working in the vicinity, suitable hearing
protection should be worn.
- Vibration.
Warning: The current value of vibration emission during the use of the machine may
deviate from the manual or the specified manufacturer. This can be caused by the