Laser Safety Designation (Iec 60825-1); External Laser Warning Information; Internal Laser Warning Information; Laser Classification - Nikon OPTOS Daytona P200T Manuel D'utilisation

4.2 Laser safety designation (IEC 60825-1)

All P200T product variants are Class 1 laser devices at the eye, and comply with IEC/EN
60825-1:2007 and 21 CFR1040.10 and 1040.11 except for deviation pursuant to Laser
Notice 50, dated June 24, 2007.
CAUTION
Based on current scientific knowledge, a Class 1 laser device can be considered as safe
by engineering design, and safe under reasonably foreseeable conditions of operation.
This device emits a complex pulse pattern from the front aperture of the device.
Wavelengths: 635 nm ±5nm, 532 nm ±2nm
Single frame exposure duration: <0.4 seconds

4.2.1 External Laser warning information

Location of Laser warning
Positioned on the rear scan
head cover.

4.2.2 Internal Laser warning information

Location of Laser warning
Positioned on the beam cover.

4.2.3 Laser classification

Laser classification
System
Embedded

4.3 Electromagnetic compatibility (EMC)

The P200T is intended for use in the electromagnetic environment as specified in the following tables. The
customer or the user of the device should assure that it is used in such an environment.
Part Number: G102748/9GWE
Copyright 2017, Optos plc. All rights reserved.
Warning information
Warning information
VISIBLE AND INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
Classification information
Class 1 as defined by IEC/EN 60825-1
Class 1 as defined by 21 CFR1040.10 and 1040.11.
Class 3B as defined by IEC/EN 60825-1
Class IIIb as defined by 21 CFR1040.10 and 1040.11.
Chapter 4 - Technical Specification
Peak power : 4 mW
Angular period of scan: 70μs rad -1
CLASS 1 LASER DEVICE
CLASS 3B LASER PRODUCT
Page 55 of 65
English