Switch On Browser-Based Review Clients; Switch Off At The End Of Each Day - Nikon OPTOS Daytona P200T Manuel D'utilisation

Chapter 3 - How to...
device starts up.
The status lights on the front of the scan head cover will flicker and then settle on the green
l
light.
The touch screen powers up.
l
4. Wait for the scan head to start up. The following happens during start up:
The scan head takes less than five minutes to start up.
l
The system will run a series of self-tests during this time.
l
The status indicator will be purple while the self-tests are running.
l
The imaging procedures will be available when the self-tests have completed and the status
l
indicator is green.
5. Enter your username and password on the touch screen when prompted. Usernames and passwords
are assigned by your System Administrator, see Managing user details on page 39 (all passwords are
case sensitive).
Note
If there is a network error when starting the scan head it is likely that there is a temporary problem
l
with the image server. You can attempt to clear problems by restarting the image server, see How
do I restart the image server? on page 48 .
You will be unable to capture images if the self-tests have
l
scan head. If the problem persists please contact your Optos representative, see Contact us on
page 59 .

3.1.1.3 Switch on browser-based review clients

Captured images can be reviewed using the
access the patient details and images stored on the system.
Browser-based review clients have to be on the same network as the scan head and the image server. Usually,
browser-based review clients have been logged off at the end of each day. To login to a browser-based review
client:
1. Press
[Ctrl]+[Alt]+[Del]
2. Type your username and password. Select
3. Connect to the
OptosAdvance
4. Enter your username and password when prompted. Usernames and passwords are assigned by your
System Administrator, see Managing user details on page 39 (all passwords are case sensitive).
If you are using the Vantage
patient details and access to images.
Usually, Viewing PCs have been logged off at the end of each day. To login to a Viewing PC:
1. Press [Ctrl]+[Alt]+[Del]
2. Type your username and password. Click
3. Run the Optos Vantage Review

3.1.2 Switch off at the end of each day

be closed down properly at the end of each working day, see Shut down the scan head on
The system
MUST
the facing page .
Page 30 of 65
English
OptosAdvance
to display the Unlock Computer
OK
URL from your browser.
software for captured image reviewing, you need to login to the Viewing PCs for
Unlock Computer
to display the
OK
.
application.
been successful. Please restart the
NOT
software. You need to login to
dialog box.
.
dialog box.
Copyright 2017, Optos plc. All rights reserved.
OptosAdvance to
Part Number: G102748/9GWE