Understanding The Storage Software - Nikon OPTOS Daytona P200T Manuel D'utilisation

Chapter 2 - Introduction
Automatic registration of image features. These registered points are used to align images that are
l
viewed together. You can also register image reference points manually.
Annotation and Measurement tools that provide graphical mark-ups on the images. These mark-ups
l
are saved with the patient medical record.
Image Measurements including distance and area measurements, and cup-to-disk ratio.
l
Review Notes indicating image review status and comments, for example, diagnostic pathology
l
coding.
You can review the current image in the
l
would be seen via a Binocular Indirect Ophthalmoscope (BIO).
You can also use the
l
current image on a 3D model eye. You can run the animated "Fly-Through" or demonstrate refractive
errors and Intraocular Lenses.
Distribution
Once you have completed your review you can send the image to someone else. You can e-mail, export or print
images. If the recipient has the opto map image viewing application they can review the original image.
Alternatively, an adjusted image can be sent. The reviewer can look at the image using any common graphics
application.
You can print images using a variety of ways using the printing features.
You can also import images into the patient's record.
The Vantage Review application is run from the following:
Double-click the desktop icon
l
Start > All Programs > optos V2 Vantage Pro > Review
Start Menu –
l

2.6.3.4 Understanding the storage software

Vantage Storage
The application lets you archive the patient database and image files. You can also clean out
the hard disk to make space for new images. The database and images must be archived and cleaned up
regularly to make space for new image files and to provide a backup if the data is lost or damaged.
The Vantage Storage application features include:
Almost fully automated CD or DVD archiving so all you have to do is put in a disk and start the
l
process.
Scheduled archiving to either a network location or a
l
Integrated verification that confirms the data writing process was successful.
l
Storage status indicating the online storage status and how many images are not archived.
l
The database holds patient information and references the location of the image files. The image files are
initially held in a separate image store on the PC hard disk. These image files are large and must be archived
and cleaned up to make space for new image files. If you do not archive regularly you will fill the hard disk and
be unable to capture more images. Lost or corrupted files can be restored from the archived backups.
The Vantage Storage application is run from the following:
Double-click the desktop icon
l
Start Menu – Start > All Programs > optos V2 Vantage Pro > Storage
l
1. A Network Attached Storage device is a hard disk, or Solid State Drive, that is attached to the network. It has its own network address.
Page 26 of 65
English
Simulated BIO
3D Wrap
view for patient education purposes. The
or
view. This view simulates the retinal view as it
3D Wrap
1
NAS device .
Copyright 2017, Optos plc. All rights reserved.
view displays the
Part Number: G102748/9GWE